If you have ever found yourself in a position where you need to close a pocket knife, but it won’t shut, you might be wondering how to do so. There are a few tricks you can try, including using a nail or a thumb stud. You can also hold the sharp side of the blade up and fold it, without locking it.
Fold it without locking
If you are looking for a way to fix a folding knife that won’t close without locking, you are in luck. Fortunately, there are some simple and inexpensive fixes.
First, take a look at your blade. It should be a reasonable length for the tasks you will be using it for. A good rule of thumb is to have the blade about an inch longer than you need. That way, you won’t have to hold it too tight, but it should still be comfortable for most of your uses.
Second, check to see if there is a metal lock bar located near the blade. These are typically found in the elongated part of the handle and are designed to help prevent the blade from coming out unexpectedly.
Finally, you may want to consider replacing the blade. Most manufacturers will cover damage caused by a defect. However, if you aren’t sure about the quality of your pocket knife, you can always take it to a local knife-smith for repairs. They will have all the proper equipment to handle a variety of pocket knives.
Use a nail
If you have a pocket knife that will not close, you are not alone. This is a frustrating problem, especially if you’re a novice user. There are a few options you can try. First, you can disassemble your knife to get a better look. Then, there are some more advanced techniques. You might even want to consider giving a good old-fashioned nudge to your favorite knife.
One of the most common problems is the blade pocket, or the place where the blade is held. While most of us don’t carry around our pocket knives in our pants pockets, a sloppy hand could result in a closed knife that will never be opened again. So, it’s best to be prepared for the unexpected. Fortunately, most manufacturers provide a warranty on their products.
To find out how to close a pocket knife that won’t close, you need to figure out why. Some blades are more prone to this ill-advised move than others. It might just be a manufacturing defect, or it might be something that’s simply out of your control.
Hold it with the sharp side of the blade up
There are different types of pocket knives, and they all have unique locking mechanisms. Some are simple to close, while others are more difficult. In some cases, the problem may be a manufacturing defect, while in other cases it might be a rusty or damaged blade. Fortunately, most of these problems can be fixed.
When you are trying to close your knife, be sure to hold the blade in a firm grip. You should not put your fingers over the slot in the blade, which might cause you to cut your thumb.
If the knife doesn’t close, it could be because it has a buildup of debris or pocket lint. For this reason, you should clean your knife thoroughly before closing it. This will help keep your blade from sticking.
Another common issue is a buildup of material in the blade pocket. To remove this, you can either shake the knife upside down or use a piece of wire.
Try a thumb stud
If you have a pocket knife that won’t close, there are a few things that you can try. The problem may be due to rust, debris, or other hindrances. However, if you can identify the problem, fixing it shouldn’t be difficult.
A thumb stud is a common way to close a pocket knife. It works by pushing out on the blade to allow it to lock into the handle. Some newer knives use thumb studs as a dual-purpose element.
In order to close a pocket knife with a thumb stud, you’ll need to have a firm grip on the handle. You’ll also need to have the flat side of the blade between your thumb and index finger.
Another method of closing a knife is to disassemble it. This is a quick and easy fix, but you’ll want to be careful. Your hand can become injured if you are not careful.
Sometimes it’s a good idea to watch a video online before taking your knife apart. If you’re unsure of how to put it back together, it’s a good idea to ask someone else.