How to Close a Leatherman Pocket Knife


Auto Draft 21

If you have a leatherman pocket knife and want to keep it clean, there are a few things you should know. First, you should clean your pocket knife every time you use it. Second, you should be aware of how to close a leatherman pocket knife safely.

Skeletool CX

The Leatherman Skeletool CX is a lightweight, full-size multi-tool that packs a lot of features. Although this is primarily a pliers-based tool, it also offers a bottle opener and a reversible bit driver. It also has a built-in carabiner.

This pocket-sized tool is designed to be attached to a pack or belt loop, but it can be used for a variety of tasks. In fact, it can even be attached to a D-ring on a bag. However, you must pass the thicker part of the tool around for this to work.

It does have a good handle-to-blade ratio, though. This gives you more leverage with your knife. While the blade itself is a 2.6” drop point, it is made of 154CM steel, which is a higher carbon steel than 420HC.

It’s also got a sprung wire gate to hold the blade securely in place. You can open the blade with just one hand, although you may want to get some practice.

Leatherman Crunch

There are several different ways to close a Leatherman pocket knife. The simplest and least painful method is to push the blade down into the slot. This will ensure safety and keep it locked. However, this is not recommended if you are new to closing knives.

If you are experienced, you can close your knife with one hand. Just make sure to hold the blade firmly and safely. Once you are done, it should slide easily back into the handle.

Another way to close your pocket knife is to use the axis lock. This is the most common type of locking mechanism used on pocket knives. It is also very easy to use. You simply push the rounded indentation on the bottom of the blade away from the frame and let the blade fold down.

Another method of opening a multi-tool with one hand is to press the tool into the hole in the handle. Then, the top tool will be unlocked and the rest of the tools will slide into the handle.

Cleaning your pocket knife after each use

When it comes to cleaning your leatherman pocket knife after each use, there are several tips to keep in mind. Although there are a number of different cleaning techniques, one method that is sure to work is using a mild soap and water solution.

The soap and water method can be used to clean your knife with hard-to-remove dirt and grit. For best results, you should have a soft rag or sponge at hand. Once you have removed the gunk, rinse your knife with warm water.

A good quality lubricant should also be used when cleaning your leatherman pocket knife. Several different types are available, including aerosol cans and grease tubes. Using these lubricants will ensure that your knife is functioning properly.

While most of these lubricants are petroleum-based, you can also find food-safe lubricants in mineral oil. Some are specifically designed for food preparation, such as wood block oil. You can find these oils in pharmacies and local stores.

Safety rules for handling a leatherman pocket knife

In order to ensure the safety of your pocket knife, there are certain safety rules you should follow. A good pocket knife should be sharp and well-oiled. Make sure you clean it regularly, and wipe it down after each use. If you don’t, you could end up with a dull blade.

One of the main ways you can keep your knife sharp is to run the edge of the blade across a sharpening stone. Holding your blade at a 25-degree angle, run it across the stone in a circular motion. You should also lubricate the hinges with light oil on a regular basis.

Whenever you’re using your pocket knife, you should never face the blade towards you. Instead, you should establish a safe circle before opening the blade. This way, you can make sure that no one can get into the blade. When someone enters the circle, you can close the knife.

It’s also recommended that you keep your knife in a closed position before handing it. Never open a pocket knife while you’re carrying it, as moisture can damage the handle and the blade.

Ken Onion

Ken Onion is an innovative knifemaker whose work has revolutionized the industry. Born in 1963, he hails from Kaneohe, Hawaii, and invented the SpeedSafe assisted opening mechanism for Kershaw Knives - earning him a position as Premier Knife Designer with them.

Recent Posts